drywall knife to smear spackling compound through the mesh and over each hole. If needed, apply a third skim coat after the second one dries.
Let it dry overnight, sand lightly, then apply a second thin layer.Spread a layer of spackling compound over the patch with a 6-in.Peel off the paper backing and press the mesh to the wall. Then cut a piece of fiberglass mesh to overlap the hole by at least 1 in.Wipe off any sanding dust with a damp cloth. First, hand-sand around the hole to smooth any rough spots.We used a repair kit from Manco (less than $2) that includes a pair of 8×8-in. diameter:įor holes between 1/2 and 11/2 inch diameter, bridge the gap with a piece of adhesive-backed fiberglass mesh. Anything larger must be covered with a bridging material for strength before patching compound can be applied. Use a putty knife to fill them with spackling or wall joint compound.Īllow the area to dry, then sand lightly. Tiny nail and screw holes are the easiest to fix.
#PASTE TO COVER WALL HOLES HOW TO#
How to Fill a Small Hole Fix tiny nail and screw holes: How you should proceed with your repair depends on the size of the hole you have to fix.
Wall-repair kits, available at home centers and hardware stores, make it even easier.
And if a small section of wall is really badly stained or damaged, you’ll have to cut out the affected area and cover the hole with a drywall patch.įortunately, fixing holes in drywall doesn’t require a lot of time or experience. No matter how careful you are, live in a home long enough, and you’ll find yourself with some holes in the walls to patch.
0 kommentar(er)
